R-5000 Multi-finisher

An innovative approach to the technical process, as well as to the key factors in the quality and productivity of garment reconditioning.
The design and manufacture of Rotondi series R-5000 multi-finishers is the result of more than 50 years of experience in the construction of ironing equipment.
Thanks to a number of Rotondi patents, the design concept is totally revolutionary, compared to that of traditional tunnel devices that operate with chambers.
The two side turbines put out an air flow, causing the garment to vibrate and oscillate in a manner that, together with the temperature, eliminated all types of wrinkles. Upon request, a third, upper turbine can be added for lighter garments.
The two lateral micro-filters, with their extra-large surface areas, guarantee perfect operating performance.
The single-chamber design means there is no transfer space between the steam chamber and the drying chamber.
Thanks to the trolley system, an adequet feed of garments can be established, eliminating, the labor needed to load a traditional tunnel operated with chains or feed screws.
-Ironing quality: The highly powerful steam feed from below results in an authentic clothes-dummy effect, naturally filling out the garment while also opening up the inner lining. In addition, steam is fed from the sides, reinforcing the external treatment of the garment and reducing ironing time.
​-Productivity: The garments are no longer fed in one at a time, as is the case of traditional systems using chains or feed screws, but on trolleys of any brand or model. In this way the Rotondi multi-finisher is automatically integrated with your logistics system. Children's garments can be hung on one or two levels.
-Also with traditional chain system, upon request.
-Savings in terms of space: The fact that the garments are fed from the front and not the side means that, with the bulk of the individual garments being equal, more can be placed inside.
-Economical: reduced construction costs and consumption of steam and electricity.
-Construction quality: first-rate brands selected for all pneumatic, electrical and electronic materials, while all the parts that come into contact with steam are made of stainless steel. Upon request, the entire multi-finisher can be made of stainless steel.