Specifications:
-Width: 78 in. (1.98 m) 96 in. (2.44 m) 108 in. (2.74 m) 114 in. (2.90 m) 126 in. (3.20 m) 156 in. (3.96 m)-Length: 16 ft. (4.88m) 20 ft. (6.10m) 36 ft. (10.97m) -Drive System: Dual-X Axis, Y-Axis & Theta Axis. X & Y-Axis Rack & Pinion Drive, Brushless Servo Motors -Electric Control Power/PC: 230V, 3 ph, 50/60 Hz, 5.4 kVA. Stand-alone step-down transformer required for other voltages. -Electric Vacuum Blower: 208/230/380/460V, 3ph, 50/60 Hz, 10 HP, VFD control -Power: Pneumatic: 75 – 90 psi at 15 SCFM (5.17 – 6.2 bars at 0.42 cmm) |
-Maximum Cutting Speed: 60 inches/second (152.4cm/second) -Maximum Conveyor Speed: 11 inches/second (28cm/second) -System size dependent. -Maximum Acceleration: 1.3g -Maximum X/Y Speed: 60 inches/second -Compressed Air Consumption: 15 cfm -Sound Level: <76 db(A) -Operating Temperature: 55 – 100°F (12 – 37°C) -Humidity: 20 – 80% (non-condensing) |
The static table system is available in a range of system lengths and widths to meet the demands for prototypes, one-offs and full production runs. The system's high-precision configuration features multi-axis motion for more defined and accurate cuts. Material is spread across the static table by an operator or with the use of a pneumatic gripper bar. This computer-controlled system features zoning capabilities to enable cutting in one area while the operator is simultaneously picking parts in another, maximizing daily production capacity.
|
Specifications:
-Width: 54 in. (1.37m) 60 in. (1.54m) 72 in. (1.82m) 78 in. (1.98 m) 96 in. (2.44 m) 108 in. (2.74 m) 114 in. (2.90 m) 126 in. (3.20 m) 156 in. (3.96 m)+ -Length: 8 ft. (2.44m) 12 ft. (3.66m) 16 ft. (4.88m) 20 ft. (6.10m) 36 ft. (10.97m)+ -Drive System: Dual-X Axis, Y-Axis & Theta Axis. X & Y-Axis Rack & Pinion Drive, Brushless Servo Motors -Electric Control Power/PC: 230V, 3 ph, 50/60 Hz, 5.4 kVA. Stand-alone step-down/up transformer required for other voltages. -Electric Vacuum Blower: |
208/230/380/460V, 3 ph, 50/60 Hz, 7.5 HP, VFD control optional
-Power: Pneumatic75 – 90 psi at 15 SCFM (5.17 – 6.2 bars at 0.42cmm) -Maximum Cutting Speed60 inches/second (152.4cm/second) -Maximum Acceleration1.3g -Maximum X/Y Speed60 inches/second -Compressed Air Consumption15 CFM -Sound Level: <76 db(A) -Operating Temperature: 55 – 100°F (12–37°C) -Humidity: 20 – 80% (non-condensing) |
971 Airport Rd. | Jefferson, GA 30549
Local +706 367-2755 | Fax +706 367-4112 SewnProducts@SewnProducts.com |
192 East Jefferson Blvd. | Los Angeles, CA 90011
Local +213-626-6765 | Fax +213-741-0733 info@ahearncutting.com |