Eastman Eagle Static Cutter (S-135)
Safety:
-Four remote emergency stops: two on cutting gantry, two system-mounted -Additional gantry-mounted stop disks pause system operation until returned to neutral and reset. Operation can then be resumed from any position -Tool head is equipped with plexiglass safety window to keep hands free of knife during operation -Single turn-off point with a universal power system for lockout/tagout safeguards employees from unexpected start-up |
The static table system is available in a range of system lengths and widths to meet the demands for prototypes, one-offs and full production runs. The system's high-precision configuration features multi-axis motion for more defined and accurate cuts. Material is spread across the static table by an operator or with the use of a pneumatic gripper bar. This computer-controlled system features zoning capabilities to enable cutting in one area while the operator is simultaneously picking parts in another, maximizing daily production capacity.
Specifications:
-Width: 54 in. (1.37m) 60 in. (1.54m) 72 in. (1.82m) 78 in. (1.98 m) 96 in. (2.44 m) 108 in. (2.74 m) 114 in. (2.90 m) 126 in. (3.20 m) 156 in. (3.96 m)+ -Length: 8 ft. (2.44m) 12 ft. (3.66m) 16 ft. (4.88m) 20 ft. (6.10m) 36 ft. (10.97m)+ -Drive System: Dual-X Axis, Y-Axis & Theta Axis. X & Y-Axis Rack & Pinion Drive, Brushless Servo Motors -Electric Control Power/PC: 230V, 3 ph, 50/60 Hz, 5.4 kVA. Stand-alone step-down/up transformer required for other voltages. -Electric Vacuum Blower: 208/230/380/460V, 3 ph, 50/60 Hz, 7.5 HP, VFD control optional -Power: Pneumatic75 – 90 psi at 15 SCFM (5.17 – 6.2 bars at 0.42cmm) -Maximum Cutting Speed60 inches/second (152.4cm/second) -Maximum Acceleration1.3g -Maximum X/Y Speed60 inches/second -Compressed Air Consumption15 CFM -Sound Level: <76 db(A) -Operating Temperature: 55 – 100°F (12–37°C) -Humidity: 20 – 80% (non-condensing) |
Eastman's static single-ply cutting machines offer several benefits, including:
- Precision cutting: These machines use advanced technology and high-quality materials to ensure accurate and consistent cutting of single-ply materials. This leads to fewer errors and a higher-quality end product.
- Efficiency: By automating the cutting process, these machines can significantly increase the speed of production, which can lead to increased output and profits.
- Versatility: Eastman's cutting machines can handle a wide range of materials, including vinyl, fiberglass, composites, upholstery, aramid, kevlar, leather, and fabric. This versatility makes them ideal for use in a variety of industries, from fashion and automotive to industrial manufacturing.
- User-friendly design: Eastman's machines are designed to be easy to use, with intuitive controls and a simple interface. This makes them accessible to operators with varying levels of experience and skill.
- Durability: Built with high-quality materials and advanced technology, these cutting machines are designed to withstand the rigors of industrial use and provide reliable performance over time.