VBM 4650 EV9R Automatic Loop Setting Unit
Equipped with a completely new 7” colored touch screen panel, which is now totally user-friendly (the easiest-to-use ever made), new presser foot, new loop aligner system, new electronic and new software fully in-house developed by Vi.Be.Mac.
Specifications:
-Sewing Head: Vi.Be.Mac. -Max Speed: 2.800rpm -No. of stitches: 1 to 999 (programmable) -Needle gauge: 20 to 80 mm -Loop width: 8 to 25 mm (optional 30 mm) -Finished Loop: 32 to 85 mm -Sewing area: 15 x 28 mm |
Electronics Features:
-New 7" Colored Super fast touch screen panel
-New CPU assures a much better software management, a better seam quality, easier adjustments and patterns, more precision, more customizable and more fashion options
-Updates through USB or Internet (remote control)
-Preview of new patterns visible on the screen
-Error History Reporting
-Possibility to work without the touch Screen Panel in case of breakdown
-Auto-diagnostic system to avoid errors
-Control KEY to allow the machine manager ONLY to change the unit parameters (operator will not be able to sabot/change anything)
Mechanical Improvements:
-New 400W motors for the X & Y movements;
-New presser foot with extra pressure and less flexure, besides lower barycenter;
-Counter-weight device to counterbalance the presser foot thrust and keep it always the right position - Less usury of X&Y carriage;
-New thread wiper to facilitate the needle threading;
-New LOOP ALIGNER SYSTEM to avoid the loop mispositioning on the fabric, especially for the folded tails (now always aligned);
-New 7" Colored Super fast touch screen panel
-New CPU assures a much better software management, a better seam quality, easier adjustments and patterns, more precision, more customizable and more fashion options
-Updates through USB or Internet (remote control)
-Preview of new patterns visible on the screen
-Error History Reporting
-Possibility to work without the touch Screen Panel in case of breakdown
-Auto-diagnostic system to avoid errors
-Control KEY to allow the machine manager ONLY to change the unit parameters (operator will not be able to sabot/change anything)
Mechanical Improvements:
-New 400W motors for the X & Y movements;
-New presser foot with extra pressure and less flexure, besides lower barycenter;
-Counter-weight device to counterbalance the presser foot thrust and keep it always the right position - Less usury of X&Y carriage;
-New thread wiper to facilitate the needle threading;
-New LOOP ALIGNER SYSTEM to avoid the loop mispositioning on the fabric, especially for the folded tails (now always aligned);